Aerospace Engineering Solutions is proud to offer immediate purchasing options on Army United States Department Of The part number 7189604, a Worm Shaft product we carry that is listed with the NSN 3040-00-385-7808 for ease of identification. If you would like to learn more about this item, be sure to complete the Request for Quote (RFQ) form provided on this page. By including essential details like your target price, desired quantity, and expected fulfillment timeline, you are ensured a fully customized quote from our team.
Note : We Will Not Share Your Information To Any Third Parties.
For your reference, this product is traceable to Army United States Department Of The through the CAGE Code 19204, as well as categorized under FSC 3040 Miscellaneous Power Transmission Equipment based on the first four digits of the NSN 3040-00-385-7808. Using such information, you can easily narrow down exact items of need for an ease of procurement. With our quotation service in mind, be sure to submit a completed form when you are ready to begin. Should you wish to speak with one of our representatives to discuss services, you can also give us a call or email at your convenience. With all that we offer, choose Aerospace Engineering Solutions for part number 7189604 and other NSN items of need.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3040-00-385-7808 Item PartTypeName: WORM SHAFT | 3040 | 003857808 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| A | 0 | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 7189604 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AASA | THREAD LENGTH | 0.495 INCHES MINIMUM FIRST END,THIRD PORTION |
| AASA | THREAD LENGTH | 0.505 INCHES MAXIMUM FIRST END,THIRD PORTION |
| AASA | THREAD LENGTH | 0.948 INCHES NOMINAL SECOND END,FOURTH PORTION |
| AAUJ | SPLINE MAJOR DIAMETER | 1.116 INCHES MINIMUM SECOND END,THIRD PORTION |
| AAUJ | SPLINE MAJOR DIAMETER | 1.117 INCHES MAXIMUM SECOND END,THIRD PORTION |
| ABHP | OVERALL LENGTH | 8.875 INCHES NOMINAL |
| ABRR | KEYWAY WIDTH | 0.188 INCHES NOMINAL FIRST END,THIRD PORTION |
| ABSC | SPLINE MINOR DIAMETER | 1.021 INCHES MINIMUM SECOND END,THIRD PORTION |
| ABSC | SPLINE MINOR DIAMETER | 1.022 INCHES MAXIMUM SECOND END,THIRD PORTION |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNF SECOND END,FOURTH PORTION |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNS FIRST END,THIRD PORTION |
| AKAF | SHAFT THREAD DIRECTION | RIGHT-HAND FIRST END,THIRD PORTION |
| AKAF | SHAFT THREAD DIRECTION | RIGHT-HAND SECOND END,FOURTH PORTION |
| BYFR | TEETH HARDNESS RATING | 35.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM |
| CFFB | WORM THREAD QUANTITY | 1 |
| CFFC | WORM THREAD LEAD | 0.625 INCHES NOMINAL |
| CFFD | WORM THREAD DIRECTION | LEFT-HAND |
| CFFF | WORM PRESSURE ANGLE IN DEG | 14.500 |
| CFFG | WORM HELIX ANGLE | 4 DEG 33 MIN. |
| CFFK | WORM OUTSIDE DIAMETER | 2.8975 INCHES NOMINAL |
| CFFL | WORM PITCH DIAMETER | 2.500 INCHES NOMINAL |
| CFFM | SHAFT HARDNESS RATING | 35.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM |
| CFFN | WORM THREAD SECTION LENGTH | 3.188 INCHES NOMINAL |
| CFFP | WORM BODY LENGTH | 3.563 INCHES NOMINAL |
| CFFQ | WORM BODY TAPERED BEARING SURFACE END | NOT PROVIDED |
| CFFW | SHAFT LOCATION | BOTH ENDS OF WORM |
| CFFX | STRAIGHT UNTHREADED LENGTH | 0.557 INCHES NOMINAL SECOND END,SECOND PORTION |
| CFFX | STRAIGHT UNTHREADED LENGTH | 0.625 INCHES NOMINAL FIRST END,SECOND PORTION |
| CFFX | STRAIGHT UNTHREADED LENGTH | 0.719 INCHES NOMINAL FIRST END,FIRST PORTION |
| CFFX | STRAIGHT UNTHREADED LENGTH | 0.719 INCHES NOMINAL SECOND END,FIRST PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 1.1810 INCHES MINIMUM FIRST END,SECOND PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 1.1810 INCHES MINIMUM SECOND END,SECOND PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 1.1814 INCHES MAXIMUM FIRST END,SECOND PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 1.1814 INCHES MAXIMUM SECOND END,SECOND PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 1.438 INCHES NOMINAL FIRST END,FIRST PORTION |
| CFFZ | UNTHREADED SECTION KEYWAY WIDTH | 0.1880 INCHES NOMINAL FIRST END,SECOND PORTION |
| CFGB | UNTHREADED SECTION KEYWAY DEPTH | 0.094 INCHES NOMINAL FIRST END,SECOND PORTION |
| CFQN | STRAIGHT SPLINE LENGTH | 1.245 INCHES NOMINAL SECOND END,THIRD PORTION |
| CFQP | THREADED SECTION PIN HOLE DIAMETER | 0.140 INCHES NOMINAL SECOND END,FOURTH PORTION |
| CFQT | STRAIGHT SPLINE QUANTITY | 10 EITHER END |
| FEAT | SPECIAL FEATURES | NO. 63 FINISH ON OD OF SECOND STEP,ON BOTH ENDS,ON SPLINE AND WORM TEETH SURFACES |
| MATT | MATERIAL | STEEL |
| SFTT | SURFACE TREATMENT | PHOSPHATE |
| ZZZV | FSC APPLICATION DATA | LAUNCHER,762-MM ROCKET,TRUCK MOUNTED,XM289 |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
